Show your support for the brave defenders of Israel with this color lithophane of Yigal Slavin's photo of the Israeli Defense Forces lighting a Menorah in Gaza.
Includes 2 verions: One with just the photo. Second with the biblical text "הִנֵּה לֹא־יָנוּם וְלֹא יִישָׁן שׁוֹמֵר יִשְׂרָאֵל" - "See, the guardian of Israel
neither slumbers nor sleeps!" (Psalms 121:4) superimposed on the photo.
Created with HueForge.
Sized to fit the Bambu lithophane frame and light board.
Printing Instructions are the same for both versions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use Arachne wall generation.
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Brown Transmission Distance: 2
Swap Instructions:
Start with Jade White
At layer #7 (0.64mm) swap to Lemon Yellow
At layer #11 (0.96mm) swap to Yellow
At layer #12 (1.04mm) swap to Red
At layer #18 (1.52mm) swap to Brown for the rest.