as this is NOT behind a paywall, your support would be appreciated!
********************************************************************
BUTTONS V2 NOW UPLOADED!
Changes were made to loosen up the dpad and ok button a little bit, it was found that sometimes the dpad wouldn't press properly, or would press more than one direction at a time.
********************************************************************
Superseded on 16-03-2024
New file works with a broader range of flippers, also noting that the ok buttons press length has been extended, so you need to trim it down to a length that works well for you! this has been done due to finding that the good working length has been varying between a few different devices, but they work well!
they have also been extended out for better feel, the ok button is sitting out a little further than the dpad now also!
********************************************************************
OLD FILES:
Replacement buttons for the flipper zero, with custom inlays.
Confirmed good fitment & operation on my own personal flipper.
********************************************************************
The clips were removed due to being an area of weakness with FDM printing but it isnt a huge issue being that they cant fall out due to the case anyway.
********************************************************************
Printed on an X1C - 0.08 layer height on a 0.2MM NOZZLE !
i can't confirm if you will get good results with a 0.4 nozzle
Thanks to everyone for the support <3
https://paypal.me/zrcrackiin