Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA META Sunlu Teal Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #13 (1.12mm) swap to Teal
At layer #22 (1.84mm) swap to Jade White for the rest.