Elegant Gift Box

Copyright Claim

Elegant Gift Box

Boost
25
46
7

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
3 h
3 plates
4.7(3)

Boost
25
46
7
0
105
27
Released

Description

This is a small elegant box with hinged lid using hidden hinges and small magnets to keep it closed.

 

The box uses 3mm x 2mm magnets like these https://a.co/d/gKtdGAn from Amazon and these concealed barrel hinges from Amazon like these https://a.co/d/3iLWSql.

 

There are two version of the lid, one with a simple flower pattern on the top and the other plain so you can add your own text of pattern.

 

The magnets should be a press fit (I used a small vise to push them in). Make sure you get the polarity of the two magnets correct or otherwise the lid will be repelled from the base rather than keeping it closed.

 

The hinges should be and easy fit and I use a carefully placed drop of superglue in each hole to keep them in (careful not to glue the lid to the base of stick the hinge halves together) The “female” part of the hinge goes in the base and the “male” in the lid. Put both hinges in the base then the lid.

 

Enjoy!

Comment & Rating (7)

Please fill in your opinion
(0/5000)

Great looking box before I print .... Your Amazon link for the hinges doesn't work. Please provide kind and size of hinges. Amazon shows these: 1. Folding Support Hidden Concealed Cylinder Hinge Brass Tone 4mm x 15mm 2. 10mm Brass Barrel Hinges Hidden Invisible Cabinet Furniture Hinges Hidden 180 Degree Open Angle
The designer has replied
0
Reply
Thank you. Try this link https://a.co/d/3iLWSql
0
Reply
Replying to @dacostad :
that works. thank you
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
link to the hinges doesnt work. had to measure and guess. looks and works great
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
Thank you for your rating.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more