Celebrate with us the Year of the Dragon
I created 2 different versions.
1x AMS version
1x Everything in parts printable
Some support is needed at the stand.
Set the upper interface distance to 0.15mm so the support can be easily removed
The dragon is pressed into position with light pressure.
If you have any suggestions, please let me knowTHANKS
Feiert mit und das Jahr des Drachens
Ich habe 2 Verschiedene Versionen erstellt.
1x AMS Version
1x Alles in Teile Druckbar
Es wird beim Stand Etwas Support Gebraucht.
Obereren Schnittstellenabstand auf 0.15mm einstellen so lässt sich der Support leicht entfernen
Der Drache wird mit leichten Druck in den Stand gedrückt.
Bei Anregungen bitte bescheid geben
DANKE