There is a new revised version! Needs no adhesive tape, only push it on the top of the A1.
https://makerworld.com/de/models/122915#profileId-132408
The original light on A1 wasn't enough for me, so I designed additional lighting.
The lightstrip holder also serves as a reflector; it is recommended to use a light color for printing.
The holder is printed in two parts and then glued together. You can use simple superglue for this. But I prefer to use the uhu allplast glue for plastics.
https://amzn.to/3RU8ZE3 (affiliate link)
After glueing the parts together you can add some adhesion tape on the flat side to mount it at the printer and glue your lightsrip inside.
Be careful with the cables of your lightstrip, be sure to keep them away from moving parts.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.