Tired of jumping and jamming spools in your AMS? Weight them down!

A must have when your spool is running light on filament.

This universal spool weight hold what ever you want! I put inside a few washer and some salt.

The first part is closed individually to avoid surprises when you want to position it on another spool and thanks to the second piece, always threaded, it can be used on any spool compatible with AMS of any thickness.

ATTENTION:

Supports are needed inside the internal body. Right click on the model, click on “Add supports enforcer”, select cylindr and make sure it holds the entry for the small cap.

The filament must have a well calibrated flow for good aestretic and functional performance.

-- PRINTING PROBLEMS --

I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model.
All my files are tested before being published and the print profile with which I succeed is the one I publish.
Thank you very much for your understanding and happy printing to everyone!