Trash Bin German
Copyright Claim
Trash Bin German
Boost
68
138
22
Print Profile(3)
0.16mm layer, 2 walls, 15% infill
Designer
4 h
1 plate
0.16mm layer, 3 walls, 15% infill
Designer
5.7 h
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
10.1 h
1 plate
Boost
68
138
22
1
256
218
Released
Description
Description
The 3D-printed waste bin in 1:6 scale for a dollhouse is an impressive miniature model. This kit includes a detailed bin with the following features:
- Opening Lid: The waste bin features a functional lid that easily opens and closes, allowing for realistic disposal play.
- Rotatable Wheels: The two miniature wheels are movable and can rotate on their axis to simulate the movement of the bin within the dollhouse.
- Customizable Size: Depending on your dollhouse's requirements, the size of the waste bin can be adjusted to fit perfectly into the surroundings.
- Optional Support: While the model is best printed with support, it can also work without it if your 3D printer allows for it.
This kit allows you to equip the dollhouse with a realistic waste collection system, providing hours of playtime fun at a 1:6 scale, perfect for dolls like Barbie or similar figures.
Comment & Rating (22)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Nice used for battery recycling
(Edited)
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
the model IS fragile and breaks very easily. Joints snap easily. they are simply to think. this was ABS as Material, second try....
(Edited)
0
Reply
Wertstoff-Tonne
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Daughter printed, came out well. thank you.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
I tried to reduce the size too much which resulted in a loss of detail and stringing.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
My daughter wanted a garbage can for her barbie house. This worked perfectly!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Deckel, die Halter sind zu schwach ausgelegt
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Bed Adhesion Issue
The designer has replied
1
Reply
That is not a problem from the Model. use the right plate and glue.
0
Reply
Deckel, Aufnahmen könnten was stärker sein!
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
1
Reply
License
This work is licensed under a
Creative Commons Public DomainRelated Models
© 2024 MakerWorld