Spool inner spacer for reusable spools
Copyright Claim
Spool inner spacer for reusable spools
Boost
18
36
17
Print Profile(1)
0.2mm layer, 2 walls, 30% infill
Designer
1.1 h
1 plate
Boost
18
36
17
0
94
88
Released
Description
Inner spool spacer for Bambu Lab reusable spools, allows for winding 3rd party filament or rewinding Bambu officual filament. This similar to the cardboard inner tube used in filament refills. Contains the guide notch found on the reusable spools and two filament starting holes.
Comment & Rating (17)
All
Print Profile
0.2mm layer, 2 walls, 30% infill
Works perfect. Thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
This is great with ONE flaw. The hole for the filament is TOO SMALL. I have to drill a bigger hole.
The designer has replied
0
Reply
Thank you for the feedback. Currently it has 2mm diameter holes, but I can have look at uploading an additional file with slightly larger holes. What size drill bit did you have to use?
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
top Adapter
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
Could use filament retention holes on both sides, but otherwise excellent.
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
pressoché perfetto👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld