Badmintonrollen-Befeuchtungsdeckel

Badmintonrollen-Befeuchtungsdeckel

Boost
0
1
0

Print Profile(0)


No Print Profile yet. Add one to earn points.

+ Add Print Profile

Boost
0
1
0
0
4
0
Released

Description

Summary

Federbälle neigen in den Aufbewarungsrollen gerne dazu, auszutrocknen, was die Haltbarkeit der Federbälle ernorm verringert. Dieser Deckel mit feuchten Hydro-Kugelelementen bewirkt eine ständige Feuchtigkeitsabgabe und verhindert somit ein frühzeitiges Austrocknen und der damit verbundenen Haltbarkeitsreduzierung der Bälle.
Ca. 10 Stück Hydroperlen (Pearl.de) werden in das obere Loch eingedrückt. Der ganze Deckel wird dann ein paar Stunden in Wasser eingelegt, sodass die Kugeln sich vollsaugen können. Danach kann der Deckel auf die Badmintonrolle aufgesetzt werden und die Bälle erhalten so über mehrere Wochen eine feuchte Rollenumgebung, was die Haltbarkeit der Federbälle erhöht.

Die Öffnung für die Hydro-Kugeln ist 3,7mm groß. Es sollten also keine deutlich größeren Kugeln gekauft werden.

Diese Kugel sollten funktonieren. (Nicht selber getestet!)
https://amzn.eu/d/1BDpBbR

Google-Translate:

Shuttlecocks tend to dry out in the storage rolls, which greatly reduces the durability of the shuttlecocks. This lid with moist hydro-ball elements causes a constant release of moisture and thus prevents premature drying out and the associated reduction in durability of the balls. Approx. 10 hydro beads (Pearl.de) are pressed into the upper hole. The whole lid is then placed in water for a few hours so that the balls can soak up water. The lid can then be placed on the badminton roller and the balls will be kept in a moist roller environment for several weeks, which increases the durability of the shuttlecocks.

The opening for the hydro balls is 3.7mm. So no significantly larger balls should be bought. This orb should work. (Not tested by myself!)

https://amzn.eu/d/1BDpBbR

The TPU cover version can be printed without support.

Print Settings

Printer:

Artillery Sidewinder X1

                                            

Rafts:

No

Supports:

No

                                            

Resolution:

0.2

Infill:

20%

                Filament:                                     DasFilament TPU                    

Post-Printing

Slicer-Einstelllung

            

Der Deckel wurde von mir mit der Cura-Option "ungleichmäßige Außenhaut" gedruckt. Mir gefällt es 😉.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more