BLINK MINI CAM SURROUND AND ARM (V2 LED ARM)
Copyright Claim
BLINK MINI CAM SURROUND AND ARM (V2 LED ARM)
Boost
49
82
26
Print Profile(5)
A1 BLINK ARM WITH LED KIT 0.2mm layer, 3 walls, 15% infill
Designer
39 min
1 plate
BLINK MINI SURROUND 0.2mm layer, 3 walls, 15% infill
Designer
44 min
1 plate
A1 MINI BLINK ARM WITH LED KIT 0.2mm layer, 3 walls, 15% infill
Designer
39 min
1 plate
0.2mm layer, 3 walls, 15% infill
1 h
1 plate
Click to see more
Boost
49
82
26
0
89
77
Released
Description
IF YOU FIND THE JOINTS GETTING LOOSE OVER TIME . JUST DISASSEMBLE & TAKE CA GLUE AND LINE THE CUP UP ,LET DRY AND THEN REASSEMBLE . THIS WILL TAKE UP THE SLACK AND MAKE IT TIGHT AGAIN !
I UPDATED MY LED KIT ARM TO ACCOMADATE THE BLINK MINI CAM. So now it’s a light and a cam together.
Make
Sure TO FOLLOW FOR MORE !!
Comment & Rating (26)
All
Print Profile
A1 BLINK ARM WITH LED KIT 0.2mm layer, 3 walls, 15% infill
no issues with printing and fitment. make sure you use the proper spot for the blink camera since it seems both joints are different.
The designer has replied
1
Reply
can be used in either location . both joints are exactly the same
(Edited)0
Reply
Replying to @Infinity3DPrint
Thanks. Will give it a go again after I print another one in a different color, the one I printed first would only fit one spot, the other broke off the pins. I thought maybe it was my print settings.
0
Reply
just gotta be careful because of the orientation of the part . if you’re having trouble with breakage, you can use a heat gun and warm the joint a little
0
Reply
where did you obtain the light from?
The designer has replied
1
Reply
straight from Bambu
0
Reply
this one
0
Reply
Any chance you can design this to fit the wyze cameras? Like the v3 or OG model?
The designer has replied
1
Reply
I feel like they are to much weight to be hanging off the x gantry . the mini is 50 grams the wyze is 100 grams
0
Reply
Print Profile
FULL KIT for Generic PET-G_0.16mm layer, 2 walls, 10% infill
The print itself was fine but the socket was a little too loose for my personal preference.
The designer has replied
0
Reply
ok, in this section you should only evaluate the print profile, for the model you must leave feedback to the author of the model
0
Reply
any chance there is a mod for a Wyze V3? ty
The designer has replied
0
Reply
I don’t own a wyze and can’t make one with out physical dimensions . there is others that have made the Wyze model
0
Reply
Great design but will it fit the P1S ??
The designer has replied
0
Reply
no
0
Reply
Print Profile
A1 MINI BLINK ARM WITH LED KIT 0.2mm layer, 3 walls, 15% infill
1
Reply
Print Profile
BLINK MINI SURROUND 0.2mm layer, 3 walls, 15% infill
1
Reply
Print Profile
A1 BLINK ARM WITH LED KIT 0.2mm layer, 3 walls, 15% infill
1
Reply
Print Profile
BLINK MINI SURROUND 0.2mm layer, 3 walls, 15% infill
1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld