AMS Smoot PTFE transition v2.1, 2.5degree. Remixed by luckyluc.64

Remixed by

luckyluc.64

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 25% infill

Designer

24 min

1 plate

4.8(26)

Boost

250

189

Released

Description

Thanks to Poli27 https://makerworld.com/en/u/3153415205

I redesigned this version for the people who deeply modify their AMS and install the Hydra modification.

Hydra tilted the (4) pickup heads backward to gain space, causing my mod to hit the cover. Poli27 did bring that up to my attention and is trying to assist me on how much to tilt back.

Based on the pictures Poli27 submitted, I figure 2.5 degrees should do the trick. If it's not sufficient, let me know… And I will head back to the drawing board… Well, PC chair…

I'll save you from the rest. It's the same stuff. I'm an ABS guy, and so on. I used the same profile to test the print, but I did print in Yellow as it's not the original.

One thing. This probably works on all AMS, mod or not.

I have to add. this doesn't need a tits, Daniel… It's fine as it is. A 1.5mm tits would not improve anything. Ir d.putin the JA.

Talk to you later on.

Comment & Rating (62)

@MB3DX1C

Print Profile

0.2mm layer, 4 walls, 25% infill

Very happy with the print and fit. Snug with the desicant holders but it all fits. Thank you for the print.

The designer has replied

@luckyluc.64

Thanks for downloading it and giving feedback. I do appreciate it. You did a nice job printing-it. Enjoy

@Memsypooh

Print Profile

0.2mm layer, 4 walls, 25% infill

great design. fit perfect. Thank you

The designer has replied

@luckyluc.64

You are welcome. Thanks for downloading it and giving feedback. I do appreciate it.

@Poli27

Hello It's not enough, unfortunately, if I pull it out 2mm, it closes. :)

The designer has replied

@luckyluc.64

Hey Poli27, happy Friday OK, now I can make sure I have 2mm back. When I have a big 5 minutes, I'll update the model. Thanks P.S.: Also, let me know If I brought you more traffic to your place.

@Poli27

Please change to nick name Poli37 to Poli27 descriptions :) P.S.: Also, let me know If I brought you more traffic to your place. Ok thank You :D

@ondrovic

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

These printed great, seem to be a bit sturdy than some of the others, I had to replace a set of 4 (other not your design due to the tabs breaking), working great so far.

The designer has replied

@luckyluc.64

Thanks for downloading it and giving feedback. I do appreciate it. I like to know witch one you did have issues with. One is an idiot that copy great work and "modify it" in a way that make-it dysfunctional. The other model is a friend of mine a great designer and if it's his design, I like to bring it up to him and assist to correct the issue. Thanks anyways, it always great to be recognized by a maker.

@FutureCanada

Print Profile

0.2mm layer, 4 walls, 25% infill

worked amazing

The designer has replied

@luckyluc.64

You can't expect less of my creations. Thanks for downloading it and giving feedback. I do appreciate it.

@HastCustom3dPri

Print Profile

0.2mm layer, 4 walls, 25% infill

working great has fixed ams problems

The designer has replied

@luckyluc.64

That was my first objective: making the feeding nice and smooth. Thanks for downloading it and giving feedback. I do appreciate it.

@niko_hoffmann

Print Profile

0.2mm layer, 4 walls, 25% infill

printed beautifully

The designer has replied

@luckyluc.64

Well, you, too, did a good job by printing it properly and having your machine and filament right. Thanks for downloading it and giving feedback. I do appreciate it.

(Edited)

@pricjame

Print Profile

0.2mm layer, 4 walls, 25% infill

do not fit tight in the ams continuously come off.

(Edited)

The designer has replied

@luckyluc.64

Thanks for downloading it and giving feedback. I do appreciate it.

@ivano2774

top

The designer has replied

@luckyluc.64

Thanks for downloading it and rating my work.

@FutureCanada

WOW!!! that's all I have to say. I've tried 3 other models of different designs and none worked. I'm so sick of babysitting multiple day multicolour prints cause the ams motor over loads. i installed this model and successfully finished a 2 day print with over 1000 colour changes with not a single pause on print. thank you

The designer has replied

@luckyluc.64

Thanks for downloading it and rating my work. I design it just for you. I'm happy you appreciate it. Well, I may use it, too, LOL. And a few thousand other makers... I'm right there with you. There are not a lot of quirks, but that smooth AMS and the AMS hub relocator nail 95% of all the issues. If you did not, look at my other design. I like to click print and walk away. Thanks again. I appreciate it.

This remix is based on

AMS Smooth PTFE (update December 23)

luckyluc.64

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (62)

This remix is based on

License

Related Models

PTFE Brace for AMS Buffer

A1 / A1 Mini PTFE Support & Removal

100% Clip On AMS Buffer PTFE Angle Corrector X1C

AMS lite caps with or without ptfe guides