John Deere Lightbox LED Lamp by SilMan3D

SilMan3D

Art>Other Art Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.6 h

2 plates

5.0(10)

Boost

106

121

Released

Description

For John Deere Brand fan

See also John Deere Keychain

I recommend using a textured PEI sheet and the print profile I provided since it has settings with which I've been able to get the best results, if you do not want to use it these are the general bambu studio settings:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

Comment & Rating (22)

@RickSemperFi

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed without issue. Thanks for sharing.

(Edited)

The designer has replied

@SilMan3D

Thanks so much man 🙏

@Thegage1415

Print Profile

0.2mm layer, 2 walls, 15% infill

came out amazing!

The designer has replied

@SilMan3D

Thanks for the amazing make and feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@angry_inch

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed this in yellow and black as a gift for a JD construction mechanic. Came out beautifully and very sturdy- the walls are the thickest of any light box I’ve printed.

(Edited)

The designer has replied

@SilMan3D

I'm happy to hear that everything turned out well! 🤩 Thanks for the amazing make and feedback! 🙏 Happy printing and if you have a moment of time you can check out my other BambuLab designs! 😃

@TimmeyTurner

Boosted

Schöne und sauber konstruierte Lampe. Hat sich sehr gut drucken lassen. Sieht vom druckbild her auch wirklich richtig gut aus. Vielen Dank

The designer has replied

@SilMan3D

Thanks so much man 🙏

@user_3645444190

I've not yet made a light box but would like to make this for a family member. Are there any instructions on how to set up the wiring/power after printing?

The designer has replied

@SilMan3D

Hi, I use usb adhesive led strips with switch. Once printed, you attach the strip, run the cable through the cover, plug in the usb outlet, and enjoy the show 🤩 https://aliexpress.com/item/1005006436319696.html with Switch, White Light, 1m IP21