Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 3.1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 3.1
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #5 (0.72mm) swap to Blue
At layer #6 (0.88mm) swap to Gray
At layer #12 (1.36mm) swap to Jade White
At layer #15 (1.6mm) swap to Gray
At layer #17 (1.76mm) swap to Jade White for the rest.