After the links are finished printing, gently rotate the pieces so they rotate freely before assembly.
Remove the crossbar supports with the help of the Bambu scraper knife.
1.-Lay out the parts on a flat surface, as shown below:
2. Insert the right link inside the vertical slot and then slide it horizontally into the slide guides, and then insert the top lock pivot into the right side end of the crossbar.
3.- Repeat the step two on the left side:
4.- Insert the left and right plates.
5.- With the AMS tabs closed, press the right side lock on top of the tab.
6-Slide the middle of the crossbar under the AMS lid tab
7.- Press the left side lock on top of the left tab.
Done!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.