For commercial license and new models, join our Patreon!

Introducing the "Infinity Lamp," a groundbreaking 3D printed luminary that redefines personalization and versatility in lighting design.

This innovative project allows you to easily swap out the luminary or design at any time by simply removing and replacing the design panel in the lamp's slot.

The result is a stunning visual effect that offers endless possibilities.

Inside the "Infinity Lamp," we've incorporated RGB LEDs, enabling real-time customization with a single lamp.

You can change the lamp's appearance instantly by swapping out different design panels to match your mood, occasion, or decor. This "Infinity Lamp" comes with a bundle of three design panels featuring Santa Claus and the Grinch, perfect for the Christmas season.

Assembling the lamp is a breeze – you only need to 3D print the parts and fit them together with adhesive.

If the community embraces this project, we're excited to offer a wide range of design panels for various themes and occasions in the future.

Experience the future of customizable lighting with the “Infinity Lamp” !

ATTENTION!!

If you use my profile to print the box parts, please note that the "Middle_Front_White" and "Middle_Front_Black" parts cannot be printed via AMS due to their size and the lack of space for the purge tower. You can bypass printing one at a time by changing the type to "Negative part" for one and then doing the same thing for the other part.

Tips for better print results:

→ Color Print Order: Lighter to Darker

→ Textured PEI Sheet

→ Layer Height: 0.2

→ First Layer Flow Ratio: 1.08

→ Wall Generator: Aracne

→ Wall Transitioning Treshold Angle: 50º

Materials:

→ Glue for the box parts and for the LED's to ensure they don't come off

→ Aluminium tape on the back part to help diffuse the light from the LED's

→ RGB LED strip and bluetooth controller

→ Soldering iron to make the hole in the box (optional because it's possible to configure the hole in Bambu Studio before printing the piece)