Humidity Sensor Mount
Copyright Claim
Humidity Sensor Mount
Boost
18
30
8
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
Boost
18
30
8
1
46
41
Released
Description
A simple mount to attach square 28x48x17 gauges (such as humidity/temp) in the chamber of the X1/P1 framed machines. There is a detent on the flange that holds it onto the square openings on the frame, it can clip onto the further back or forward hole.
Comment & Rating (8)
All
i put one above that rail on my P1S, i know it likely wouldnt work on X1C because of the lidar on the head, but you won't be able to see yours where it is during any prints that are a reasonable size.
The designer has replied
0
Reply
Agreed, but compromises were made to keep it from hitting the lidar
1
Reply
Nice upgrade!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed fine with abs
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:Hat bei mir nicht an die Stelle gepasst
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld