Updated Crown - Modified to accommodate more oval head shapes Remixed by Learn With Me 3D

Remixed by

Learn With Me 3D

Props & Cosplays>Masks & Helmets

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 30% infill

Designer

5.7 h

1 plate

5.0(2)

Boost

115

Released

Description

Hello Unicorn Enthusiast,

Thank you so much for downloading my orginal model. This version has been adjusted to accommodate oval head shapes. I printed this variation in Generic Silk PLA using BL Generic Silk settings and printed without supports.

I hope you enjoy it as much as the people I have made them for.

Please like and share.

Thank you for your support!

Comment & Rating (18)

@Merilno3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Good print, but the pointy things failed, was no infill, maybe wrong settings

The designer has replied

@LearnWithMe3D

Oh no! What a shame. I am sorry the horns decided to split. I will upload a different print profile with more infil. I hope that will solve your specific issue. Either way, thank you for taking the time to upload a photo and rate the profile.

@der1Horn

Use the repair operation in bambu slicer. It will fill the horns solid so they get real infill. :) Right click on the model -> fix model.

(Edited)

@LearnWithMe3D

Thanks for the feedback. I added a new print profile which should fix the error.

@Sleepyknight

In the grand tapestry of enchanted accessories, the Unicorn Crown reigns supreme. I mean, look at this thing! It's turned my mundane existence into a galloping extravaganza of rainbow-hued bliss. It's a little small for an adult's head (it sits on top of the head comfortably, but does not go around the head, and without attaching it to your head, it's not going to stay), BUT it looks epic as a tree topper! The file did give me a warning that it needed repair -- looks like the horns had a lot of gaps, but a quick click on "fix model" fixed it, and now I have this epic unicorn crown that I never knew I even needed. tri-color silk, .16mm, 2 walls, 15% infill

The designer has replied

@LearnWithMe3D

Thank you so much for this exquisitely written review. I hope that the your rainbow-hued bliss induced by this crown makes your Christmas even more magical! Thank you for the support!

@nismo1313

Print Profile

0.2mm layer, 4 walls, 30% infill

came out great. perfect for my birthday

@Sleepyknight

Print Profile

0.2mm layer, 2 walls, 15% infill

Apparently I was so bedazzled by this crown that I went right to the page and left my review in the comments and not through the "rate print profile" page. So, my full comment is below, and here are your five stars!

The designer has replied

@LearnWithMe3D

Thank you for coming back again to share your excitement surrounding this majestic crown. I appreciate you.

@zukispeed

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@LearnWithMe3D

Thank you for the 5 star review. I hope you enjoy the print!

@PhillyLV

Print Profile

0.2mm layer, 2 walls, 25% infill

Strength Issue:used all reccomend setting and top of crown was paper thin and all of the spikes broke off.

The designer has replied

@LearnWithMe3D

I am sorry that you encountered a strength issue with the crown. I adjusted the infill settings and uploaded a new print profile. This should resolve the issues you encountered. Thank you for your feedback.

@amauricampos

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue

The designer has replied

@LearnWithMe3D

@harlzbaby93

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@LearnWithMe3D

I am sorry that you encountered issues with the crown. I adjusted the infill settings and uploaded a new print profile. This should resolve the issues you encountered. Thank you for your feedback.