Gotmud49

Well that stinks. Sorry to hear. I have a hinge test on my uno box that you could use to get your settings fixed. The hinges should have the same tolerances. Hope this helps. https://makerworld.com/en/models/119835#profileId-148361

MakeCents 3dp

Hi there-
First I want to say that I'm new to 3D printing, only a month into it, printing here and there things that interest me. This is the first file that I needed to learn to add supports. 

I printed your file and it came out great except the 2 hinges broke when trying to free them. Is there something I should have changed in my settings to avoid this? I'm using the Bambu A1 and printed with Cookiecad PLA.

THANKS

I printed the box today. we love this game. I broke one hinge but it's cool. I can still use the box. used your profile. I was going to put my set in the case. but my dice are a tad bit to big. going to print the chips and dice you have. may print the box a bit bigger to fit my set. thanks for a great file.

timeandagain12

0.08mm layer, 2 walls, 15% infill

cover

PXL_20240110_233746467_46bcd379-9218-4c66-adfc-daac6ddc9e3c.jpg

PXL_20240110_233802100_696da719-7028-4a2e-be0b-facffab909b1.jpg

PXL_20240110_233757660_d13960a4-598d-4a52-9a49-08c956a7c40f.webp

PXL_20240110_233746467_37b89832-aa58-4a60-8121-3290003ecc59.webp

PXL_20240110_233802100_4b6b3b5c-43ad-446c-9a4a-5a576d76f9e4.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_1.png

plate_2.png

plate_3.png

plate_4.png

*Increased the hinge gap a little to .22 Print in place box with dice and chips to play Left Center Right (LCR)Each player gets 3 chipsEnough room in the box for 48 chips, but only 24 on first plate (all that is needed for 8 players)The following applies to each dice you roll, and you don't roll more dice than you have chipsRoll and L and pass a chip to the leftRoll and R and pass a chip to the rightRoll a dot and keep your chipRoll a star and put a chip in the center*We have house rules that if you roll 3 stars you get all the chips in the center&nbsp;A complete plate is included but if you rather change the settings for each type, they are on their own plates.08, with ironing for the chips (and dice if you want), 15%, and supports just for the latching mechanism.65 for the bed

Print in place box with dice and chips to play Left Center Right (LCR)Each player gets 3 chipsEnough room in the box for 48 chips, but only 24 on first plate (all that is needed for 8 players)The following applies to each dice you roll, and you don't roll more dice than you have chips-Roll and L and pass a chip to the left-Roll and R and pass a chip to the right-Roll a dot and keep your chip-Roll a star and put a chip in the center*We have house rules that if you roll 3 stars you get all the chips in the center&nbsp;A complete plate is included but if you rather change the settings for each type, they are on their own plates.08, with ironing for the chips (and dice if you want), 15%, and supports just for the latching mechanism.65 for the bed

Left Center Right game

Global

Print Profile(1)

Description

Comment & Rating (8)

License

Related Models

ERGO MOUSE - LEFT/RIGHT HAND - A1, P1 & X1

Tiny Hand Left & Right / Kleine Hände

ESUN eBOX Filament Dryer Holder Skadis left/right

Center Finder