EIBOS series X Easdry extension by G.design

G.design

3D Printer>3D Printer Accessories

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

A1 PETG Profile - 0.2mm layer, 3 walls, 30% infill

13.5 h

4 plates

A1 Mini PETG - 0.2mm layer, 3 walls, 30% infill

13.6 h

6 plates

X1 / P1 PETG - 0.2mm layer, 3 walls, 30% infill

12.1 h

3 plates

Boost

Released

Description

This is an extension for the popular EIBOS SERIES X dry boxes.

IMHO this is maybe the best dry box on the market. Reliable, with coverage for the most used filaments and at very reasonable price… but with its 77 mm of clearance it lacks of space a little bit. Now with this extender, you can dry filaments on up to 125 mm large spools.

Printed in PETG, 3 perimeters, 30% infill, no supports.

Instructions in the photo section.

Finally there is place for the Fiberlogy spools!

Happy printing!

❤⭐

P. S.

Please, be so kind to give feedback!

Comment & Rating (4)

@NDMstr

Printed great. Great design. I do wish the top locking tab was wider to be snug. The model didnt have print profiles so i added them. Actually fits 2 sunlu spools side by side with additional mod to extend center section with a silicone coupler (that is normally made for intercoolers on cars).

(Edited)

The designer has replied

@g.design

I made a little redesign and the locking part is now a little bit wider. Also it is now possible the side panels to be printed vertically, in a way that gives a consistent pattern to all the frame parts. Will be updated as soon as the test print is ready.

@NDMstr

Replying to @g.design :

sounds great just let me know when it's updated and I'll make sure all the bambu profiles are updated as well.

@g.design

Replying to @NDMstr :

👍🏻

No more