Print is 150x84
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Jade White Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Red
At layer #12 (1.12mm) swap to Gray
At layer #21 (1.84mm) swap to Jade White for the rest.