Inland AMS Spool Adapter

bennny
3D Printer>3D Printer Accessories
Copyright Claim

Inland AMS Spool Adapter

bennny
Boost
44
100
83

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
20 min
1 plate
4.8(69)
Boost
44
100
83
5
377
1.2 k
Released

Description

I designed this Spool Adapter for the Bambu Lab AMS for my Inland cardboard spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STL and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 12g of filament.

 

Orientation of the holes does NOT matter for this model. You may use both the top and bottom sets of holes.

inland
microcenter
micro center
spool adapter
spool
ams
adaptive
ams saver
ams hydra
hydra
fast
quick print
sport
ludicrous
adapter
cardboard
pla pro
pla

Comment & Rating (83)

Please fill in your opinion
(0/5000)
level
@user_3959101814
Print Profile
0.2mm layer, 2 walls, 15% infill
Works perfect! Bought a Bambu with the AMS at Microcenter. I bought filament at the same time but was unaware that the machine required plastic spools. These adapters got me up and running. New to 3d printing and this was my second print after the benchy. Thanks!
The designer has replied
0
Reply
level
@bennny
thank you!! enjoy the new printer!!
0
Reply
level
@catfish3955
Print Profile
0.2mm layer, 2 walls, 15% infill
These fit great but when bending the bed to release them caused the edges to pull apart a little.
The designer has replied
0
Reply
level
@bennny
You should wait for the model to cool before removing.
(Edited)
1
Reply
level
@SlowEvo
Print Profile
0.2mm layer, 2 walls, 15% infill
Solid model, snug fit but not overly tight. I noticed on the first roll I tried it on that not all holes on the filament roll are positioned exactly the same(not the models fault). It didn't fit in one set of holes but spun it around and it fits fine.
1
Reply
level
@reaperaxe101
Print Profile
0.2mm layer, 2 walls, 15% infill
great print works on inland and overture spools
0
Reply
level
@darkoses
Print Profile
0.2mm layer, 2 walls, 15% infill
Great Print for some of the Inland Spools. Sadly it doesn't fit all Inland Spools because of size differences. I can't nor Won't blame the creator for something out of their control. I wish Microcenter would standardize their spools even if they come from different suppliers as the large spools don't fit in the AMS (Or at the very least tell us which one is the largers and smaller spools so I can avoid the Large ones).
The designer has replied
3
Reply
level
@bennny
if you DM me some pictures I can try and get ahold of the different spools. I don’t actually have a microcenter near me but I’ll be in a city with one next week
0
Reply
level
@darkoses
Replying to @bennny :
It doesn't really matter. They can't be run in a standard AMS anyways (might run in a Hydra AMS though can still run with the top open as well). They are too Large. I've notice it mainly in PLA+. can still DM you Images though.
0
Reply
level
@user_4101829380
Print Profile
0.2mm layer, 2 walls, 15% infill
awesome tool for my ams system. Definitely recommend
(Edited)
0
Reply
level
@kiler129
Pritned 6 so far, and more in progress. Great model and fits MOST of inland spools. From my tests I see they use two types of spools: thin cardboard (2.7mm; used for PETG) and thick (3.5mm; used for PLA/PLA+/TPU/ABS). This model fits the thick spools perfectly, but it's a bit loose on the thin versions. These have a radius of ~1mm less than the thick ones.
The designer has replied
0
Reply
level
@bennny
very annoying that they have two different variations. I suspected this. sorry that some are problematic for you. I would buy more from microcenter but I don’t live anywhere close to one and the upcharge for shipping is just too much to justify. thanks for the info.
(Edited)
0
Reply
level
@kiler129
Replying to @bennny :
No worries! Let me know if you need any more measurements. These overall fit great, the best out of all models I found :)
0
Reply
level
@user_1995275406
Print Profile
0.2mm layer, 2 walls, 15% infill
doesn’t fit some of the inland cardboard spools
The designer has replied
1
Reply
level
@bennny
please dm me pictures of the spool you have so I can try and fix that
0
Reply
level
@basssedir
Print Profile
0.2mm layer, 2 walls, 15% infill
This worked very well for me.
(Edited)
The designer has replied
0
Reply
level
@bennny
so you gave it 1 star?
0
Reply
level
@user_177941981
Print Profile
0.2mm layer, 2 walls, 15% infill
Works great going forwards. Going backwards I get a failed to pull back filament error every time.
1
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Inland Cardboard Spool to BL Spool Adapter

Inland Cardboard Spool to BL Spool Adapter

SpectreGadget
0
2
4
Universal Spool Adaptor for AMS Lite

Universal Spool Adaptor for AMS Lite

3D anarchy
2
50
79
SMALLER Spool adapter for AMS Lite

SMALLER Spool adapter for AMS Lite

Namiiria
2
11
9
AMS Polymaker 2024 Cardboard Spool Ring

AMS Polymaker 2024 Cardboard Spool Ring

Acheituno
0
7
11
PrivacyTermsGuidelinesFAQCookie PolicyCookie Settings
© 2024 MakerWorld