Fed up of poor lighting on your P1P or P1S? Then this might be for you
This plate replaces the stock Light diffuser and allows for fitting of a 5v COB LED strip instead which can be powered off the stock light connection or wiring (if you have patience and can get the correct JST connector off ebay or aliexpress then no changes will need to be made to the stock wiring
Simply remove the stock light and pop off the diffuser (clips along top and bottom of the diffuser)
Disconnect its connector underneath and install the newly printed plastic insert complete with COB led strip
Wire it up to stock location and reinstall
Printed from PETG
LED strip link below
https://www.amazon.com/KXZM-Powered-640LEDs-Brightness-Flexible/dp/B09XDJVH9Z/ref=sr_1_6?crid=3QTGBGAX8XPUD&keywords=led%2Bcob%2Busb&qid=1695460024&sprefix=led%2Bcob%2Busb%2Caps%2C149&sr=8-6&th=1
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.