this was printed at 200% scale with a 1mm nozzle at 0.3mm layer height it took 8 hours to print if using a 1mm nozzle you will need to increase temp I ran this was printed at 200% scale with a 1mm nozzle at 0.3mm layer height it took 8 hours to print if using a 1mm nozzle you will need to increase temp I ran PLA at 215 deg and slower speed this was at around 25mm/s at 215 deg and slower speed this was at around 25mm/s
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.