Charging stand for all models of iPhone that can use magsafe. All sizes of all the compatible phones fit.
Print face down with supports. I suggest organic as they come off really easy. Make sure you have your first layer dialed in. Might need a Lilly pad or 4 for the corners or a big brim depends on how well your adhesion is.
I print at 0.2 layer height 2 walls 10% or more infill and avoid crossing perimeters @ a max detor length of 35mm (this is to prevent hitting the weights durring moves) There are also holes in the base for weights which you can find here Just do a pause at layer height put them in then resume. (i also included a sliced file with the correct layer height pause and avoid settings)