Caliper bracket for Ikea skadis or similar Remixed by kjbturok

Remixed by

kjbturok

Tools>Organizers

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

Designer

42 min

1 plate

4.7(6)

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

Designer

52 min

1 plate

5.0(1)

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

Designer

1.1 h

1 plate

[MiniFriendly]: 0.2mm layer, 3 walls, 15% infill

54 min

1 plate

5.0(1)

Click to see more

Boost

104

Released

Description

Caliper bracket for Ikea skadis or similar.

The hooks have an end to end spacing of 84.40mm.

If you want to place the hooks yourself I leave you the following addresses.

Original model of the bracket:

https://www.printables.com/es/model/54410-multiclip-caliper-holder

The hooks:

https://www.printables.com/es/model/190617-wall-hooks-for-holes-of-at-least-45mm

Updated 05/06/2022:

Two new designs with depth gauge holder are added.

The caliber model is as follows:

https://it.aliexpress.com/item/4000735768639.html?spm=a2g0o.productlist.0.0.44563aa9ymhGZP&algo_pvid=d006feb7-1e27-4bf4-ba17-54bec783a61c&algo_exp_id=d006feb7-1e27-4bf4-ba17-54bec783a61c-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000027376423515%22%7D&pdp_npi=1%40dis%7CEUR%7C%7C4.45%7C%7C%7C%7C%7C%402100bde316517902967298305e8552%7C12000027376423515%7Csea

****If after printing the hooks do not fit into the holes of the mural, do not force it! Try sanding or cutting the holes in the mural or printed piece with a cutter first.****

If you like my designs give me like and share. If you like them a lot invite me to a coffee.

https://www.buymeacoffee.com/kjbturok

https://www.paypal.com/paypalme/ChinadlaConchinchina

ESPAÑOL

Soporte de calibre para Ikea skadis o similares.

Los ganchos tiene una separacion de extremo a extremo de 84.40mm.

Si quieres colocar tu mismo los ganchos te dejo las siguientes direcciones.

Modelo original del soporte:

https://www.printables.com/es/model/54410-multiclip-caliper-holder

Los ganchos:

https://www.printables.com/es/model/190617-wall-hooks-for-holes-of-at-least-45mm

Actualizado 06/05/2022

Se a agregado un nuevo modelo que incluye suporte para calibre de profundidad.

El modelo de calibre es el siguiente:

****Si después de imprimir los ganchos no entran en los agujeros del mural, no la fuerce!. Intente antes lijar o repasar con un cuter los agujeros del mural o la pieza impresa.****

Si te gusta mis diseños dale me gusta y comparte. Si te gustan mucho invítame a un café.

https://www.buymeacoffee.com/kjbturok

https://www.paypal.com/paypalme/ChinadlaConchinchina

Comment & Rating (11)

@ferpenas

Va perfecto. Muchas gracias.

The designer has replied

@kjbturok

Me alegro. Gracias!

@Virtasy

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

I changed the profile to a 0.4 mm nozzle. it came out perfectly without making any adjustments.

@Virtasy

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

I adapted it to my printing style, I like to print in 0.4 mm nozzle and 0.2 mm layer height . It still came out perfectly with the profile settings.

@haudihou

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

@Dasius

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

doesn’t fit mitutoyo vernier :( it’s too small.

(Edited)

@user_321158452

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

excellent print. the pegs don’t hold as snug as I would have liked though which results in them moving every time I try to pick it up. overall 4.5 stars for me.