XBox Series X Stand
Copyright Claim
XBox Series X Stand
Boost
16
25
20
Print Profile(2)
0.2mm layer, 4 walls, 30% infill, PETG
Designer
1.5 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.1 h
2 plates
Boost
16
25
20
1
50
58
Released
Description
I wanted better cooling for the XBOX Series X and the stand should be stabile, printable easy and fast. This is what i came up with. You have a lot of free space below the console, air can circulate better resulting in a better cooled console. I added a little TPU pad for the four cutouts on top of the stand.
Comment & Rating (20)
All
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
Great.
The designer has replied
0
Reply
Your stand is upside down. The Xbox is supposed to stand on those 4 feet, so it gets as much air as possible. 😉
0
Reply
Replying to @Krail3D
I'm afraid it will fall off if my son moves it.., the 4 corners should be raised so that the xbox can slide in, and then he can't slide off it! I can redesign it :D
(Edited)0
Reply
Replying to @Poli27
I modified my old stand with a slight rim, now the XBOX stands stabile and can´t be pushed off the stand any more.
https://makerworld.com/en/models/143986#profileId-156505
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I like the idea... but something to hold the Xbox inline with the base would be nice. if you can do that I'd be super happy
0
Reply
I modified my old stand with a slight rim, now the XBOX stands stabile and can´t be pushed off the stand any more.
https://makerworld.com/en/models/143986#profileId-156505
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
size is good only thing I noticed was there isn't really anything on corners to keep it set in place
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Worked perfectly, no issues at all.
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill, PETG
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld