PISTOL VR MK2
with interchangeable magnetic holder for Oculus Rift-S / Quest

Get that feeling of a gun in your hand and better aiming when playing FPS VR games like Onward, Pavlov, Contractors, Zero Caliber, etc.

STL files are correctly oriented and are easy to print! The VR Pistol is easy to assemble!

In case you want to give me a tip checkout my new RIFLE / PDW VR MK4:
MK4 PDW Assault VR Rifle for Quest 1 and 2

The magnetic pull force of the controller holder can be adjusted by using different shims. Check out my website for detailed information. See link below.

Bill of materials:
1x 1/2″ pipe length= 200mm (outer diameter 21.6mm) galvanized

1x M5x16mm screws DIN7991 / ISO10642 for the controller holder
1x M5 nut DIN934 / ISO4032
1x M3x12mm screws DIN7991 / ISO10642 for the controller holder
1x M3 nut DIN934 / ISO4032

1x Pot magnet with hole (diameter 32mm / height 8mm N45 – 34Kg)
 

UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body 217_bottom_body_v12_Quest2.3mf and use it with the other top body holders.

For a more detailed information visit my blog post on my homepage:
http://www.schweinert.com/oculus-gunstock-pdw-vr/

Copyright:
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only.
This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863

The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Print instructions

I printed the parts on a non-modified Prusa i3 MK3 with Prusament PLA army green and galaxy black. I used the default 0.3mm DRAFT profile for faster printing with no supports and 20% infill.