Chopstick gripper / holder with optional letter
Copyright Claim
Chopstick gripper / holder with optional letter
Boost
145
283
43
Print Profile(4)
Regular - Blank 0.2mm layer, 6 walls, 25% infill
Designer
18 min
1 plate
Large - Blank - 0.2mm layer, 6 walls, 25% infill
Designer
21 min
1 plate
Small - Blank 0.2mm layer, 6 walls, 25% infill
Designer
18 min
1 plate
0.2mm layer, 6 walls, 20% infill
19 min
1 plate
Boost
145
283
43
2
321
257
Released
Description
Chopstick gripper / holder with optional letter.
I made these for a kids party where a sushi platter was being served, each kid got their own with the first letter of their name.
The regular size holes variant was designed for the wood/bamboo chopsticks that are stuck together and require snapping apart.
Files include;
- STL files for each individual letter with the regular size holes (6.4mm diameter)
- STL files and .3MF profiles with no letter (blank) in 3 sizes.
- Small - 5.7mm diameter holes
- Regular - 6.4mm diameter holes
- Large - 8.2mm diameter holes (supports needed)
Scale to suit other chopsticks.
I only needed supports on the Large variant.
PLA, 0.2mm, strength BambuLab standard settings
Created from scratch but inspired by other designs.
Edited 17/03 to add small and large blank variants and tidy up descriptions.
Comment & Rating (43)
All
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
I fori sono un poco stretti per le bacchette in bambù, ma forzandoli entrano bene.
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
While wating our delivery - printed for my doughter. Thanks!
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
fast and nice print
0
Reply
holes were way to big for chopsticks,not happy with your print.
The designer has replied
0
Reply
Did you see there are 3 versions with different sized holes? they are labelled small, regular and large. Specs are in the description.
0
Reply
oh I didn't, will look again. thank you for the reply. have a great day.
regards.
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
printed easy and works as intended. had trouble adding the letter, so I just printed without.
The designer has replied
0
Reply
Sorry the profile is just for the non letter version, if you go to the 'Download STL ' section you will see all the .STLs for each letter
(Edited)0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
👌👍🙏
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
Broke immediately
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
👍
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
need bigger holes but the concept works nicely
0
Reply
Print Profile
Regular - Blank 0.2mm layer, 6 walls, 25% infill
great job I was going to sushi and now I can use chopsticks thank you
(Edited)0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld