Kallax Fillament racks Remixed by jonto81

Remixed by

jonto81

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 6 walls, 25% infill

Designer

3.1 h

2 plates

4.9(8)

19mm holes as requested

Designer

3.1 h

2 plates

Boost

Released

Description

Designed based on a printables design by "Blocker" - I done this from the ground up to suit my needs but the inspiration is from this creation.

The design consists of two parts: one for the front side and another for the back of the shelf. You can print the parts and attach them to the shelf with a rod (metal or wood) in the middle to create a sturdy and functional filament storage rack. This solution is simple and effective, and it can help you keep your 3D printing filaments organized and easily accessible. I have been getting 5 spools be row, so 10 per Cube - there are also screw holes you can use to attach to the cube if deisred (I haven't)

I had rods of approx 16mm diameter so the holes for the rods are 17mm on this model, each rod length is approx 333mm but measure your own cube twice and cut once

If you need a different size hole just let me know and I can adjust and upload

kallax

fillament

storage

Comment & Rating (16)

@zombie4ever

Print Profile

0.2mm layer, 6 walls, 25% infill

Was a perfect fit for my fillament drybox. Holds up to 8 rolls and fits two passive humidity absorbers.

(Edited)

The designer has replied

@jonto81

very nice use of it

@s_gotsch

hallo. woher hast du denn diese Box. ich wollte mir auch eine oder 2 Boxen anschaffen und bin noch auf der suche nach einer geeigneten Box wo am besten auch noch dieses rollensystem reinpasst

(Edited)

@zombie4ever

jem&fix building marked in Denmark . 60 liter box with wheels.

@bemble

Print Profile

0.2mm layer, 6 walls, 25% infill

Perfect on my mini. 4 bambu spools per row fit nicely, I can hardly put 5 new, but it’s up to the kallax and the spools, not the model. Thanks for sharing, that’s exactly what I was searching for.

(Edited)

The designer has replied

@jonto81

looking good - I am using Sunlu spools so they are probably a little thinner allowing me to get 5 across

@nicolas09700

Hi, this is possible to do the same with 19 size hole ? It's for a 18mm rods. Thanks you for this model.

The designer has replied

@jonto81

Hi, I just added a 19mm Hole profile if you want to give that a go - I am actually heading out on holidays for a while here but I will be back mid April if there are any changes you need made

@user_142672955

Print Profile

0.2mm layer, 6 walls, 25% infill

an jeder scharfen Ecke warping . brim oder warping Scheiben einsetzen

The designer has replied

@jonto81

Hi, I experienced no warping - however I made a change about a 6 months ago where I turned off the aux fan for PLA prints (I have the glass lid lifted on vents), this stopped any warping that I experienced on PLA prints as they were always lifting at the side of the aux fan

@ZILLA

Print Profile

0.2mm layer, 6 walls, 25% infill