Hueforge - Stranger Things
Hueforge - Stranger Things
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Dark Blue
At layer #8 (0.72mm) swap to Scarlet Red
At layer #11 (0.96mm) swap to Lemon Yellow
At layer #14 (1.2mm) swap to Ash Gray
At layer #20 (1.68mm) swap to Red for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
