Iron man HueForge by 2emme3dlab

2emme3dlab

Art>2D Art

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

Designer

3.7 h

1 plate

4.9(14)

Boost

110

172

198

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Eryone Black Transmission Distance: 0.3
PLA Eryone Red Transmission Distance: 5
PLA Eryone Yellow Transmission Distance: 5
PLA Eryone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.

Comment & Rating (24)

@oskar

Print Profile

0.08mm layer, 2 walls, 100% infill

base layer is too thin

(Edited)

The designer has replied

@marcoppari

thank you so much for the review. I had two choices: find the right harmony of colors to best render the image or increase the black to make the base thicker but to the detriment of the final result. I chose the first solution, I'm sorry about the missing star

@CanadianGamer

Replying to @marcoppari :

If you change your minimum depth in hueforge to 0.64 that is how thick the print will be BEFORE the detail starts being applied. This allows you not to dial up the black and take over the picture but ensure you have a solid depth still. (I learned that after I made a couple that felt to flimsy. )

(Edited)