MEGA Mason Jar with Lid badge by Every Day Counts

Every Day Counts

Household>Other House Models

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

6.3 h

2 plates

5.0(6)

JAR ONLY PETG 0,2mm layer

4.8 h

1 plate

4.8(4)

DOG BADGE + HOLDER PETG WITHOUT AMS

31 min

1 plate

LID ONLY 0,16mm Layer

1.3 h

1 plate

Boost

Released

Description

This MEGA mason jar is printed in Standard Mode (not vase mode), which makes more durable and watertight.

The lid is designed to take a badge which can be generated by the Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign). Follow the instructions below.

Create a sign/badge that will highlight what you put in the jar (it does not have to be dog treats). Go wild!

Note: This jar is compatible with my version which is printed in vase mode (https://makerworld.com/en/models/54554#profileId-56238),
so the lid from that model can be used if you don't need the badge. Likewise, you can print the lid from this profile and use it on the vase mode mason jar.

Width is 150mm wide and 180mm high. Can be printed on the Bambu A1 Mini.

Badge Instructions

Visit Make My Sign from MakerWorld (makerworld.com/makerlab/MakeMySign)
Press the ‘Create from Blank’ button (near the top)
Choose the ‘Pet Tag’ template (because it's round)
Remove the hole
Change the dimensions to 65mm x 65mm.
Set the border to be offset by 2mm (whichever weight you choose)
Set the thickness to 1mm.
Style the badge as you want
When complete, download the design and open in Bambu Studio for printing.

Badge Mounting

The badge is inserted from the underside of the lid
Use the little cross connectors to hold it in place.
Add a little dot of superglue to each of the crosses to hold them in place

Comment & Rating (13)

@3DFilmParts

Print Profile

JAR ONLY PETG 0,2mm layer

Printed great and fits the Mega mason jar thats non-vase mode!

@Gauss3D

Print Profile

JAR ONLY PETG 0,2mm layer

Printed perfectly! Will make more :)

The designer has replied

@steinbrecherhua

Nice Print. Thanks for the five Star Rating.

@zerranoman

Boosted

Awesome jar!! It was a bit tricky to print in PETG with a 0.06mm nozzle, but it turned out great in the end. Feels much sturdier than your typical vase-mode print. I've been using mine as storage for my protein powder.

@BennyBoots

Print Profile

0.2mm layer, 2 walls, 15% infill

printed and works great. Iuse it to store my accessories and tubing. printed on my A1 mini 👍 using translucent PETG

@3DFilmParts

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent print, printed in multiple materials, including clear PLA and clear PETG for a more translucent effect. Loved it!

@Gauss3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Love this, very sturdy, printed perfectly.

@im_pelk

Printed great, thanks! FYI the link for Make My Sign didn't work for me in the US - looks like its lowercase 'makeMySign' here :) 404: makerworld.com/makerlab/MakeMySign Good: makerworld.com/makerlab/makeMySign

(Edited)