Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus
Copyright Claim
Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus
Boost
27
70
10
Print Profile(1)
0.2mm layer, 3 walls, 20% infill
31 min
1 plate
Boost
27
70
10
0
475
48
Released
Description
These settings work fantastic on my 2 X1-Cs. I hope you find them useful as well! good luck.
Comment & Rating (10)
All
Thank you so much for this! Little bit of stringing, but that's to be expected.
Printing awesome!
The designer has replied
1
Reply
Awesome. Don;t forget to keep that filament dry, and I definitely recommend going thru and doing the auto calibrations on your machine with these profiles because you never know from machine to machine. Also for staining on PETG, you may have to adjust your cooling fan up 5% if you are in a high humid zone. Good luck!
0
Reply
Just wanted to say a huge thank you for the PETG profile! Had some things to print in PETG and finally took the plunge and after using the Sunlu S2 my first prints came out perfect so again, thank you very much!
The designer has replied
0
Reply
very happy they helped you!
0
Reply
@RockChewer These settings really rock. THANK YOU so much.
1
Reply
can't see the sunlu-JAYO PETG 0.4 setting when open your provided profile
0
Reply
Hello,
When I open these files, I don't see the profiles. I'm new to Bambu but I would love to get these profiles as I'm having a bunch of trouble with Sunlu PLA+
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld