Repeating Matchstick Gun by BamBam Design

BamBam Design

Toys & Games>Other Toys & Games

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

[Multicolor] 0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

2 plates

4.7(25)

[One Color] 0.2mm layer, 2 walls, 15% infill

Designer

52 min

2 plates

4.4(27)

Boost

276

398

486

412

Released

Description

A like or follow costs nothing, just like the 3D model! Thank you 🤗

Repeating Matchstick Gun

Full printable functional Toy.

It shoots 4 matches quick in a row with Pump action to reload.

You need just a rubber band and a piece of tape.

If you have no machstick around, i added a printable ammunition.😃

It shots awesome with good rubber band!

In the video i used a little cut from Thera Band Gold with a shrink tube.

Printing:

Printed all parts in PLA+ other materials should work as well.

There are small pieces! Clean build plate and add some glue-stick!

Layer height 0,2 works well

Assembly:

Important because of friction! Cut a piece of tape and roll one rotation around the rubber. You can use shrink tubing if you try with open loops and knot the rubber later.

Insert the trigger and the spring in a half body

Slide the rubber band and the repertoire lever in.

Straddle the thin piece from the body to push over the front cap. The front cap clamps the rubber as well!

Slide the front cap into the grooves and adjust the rubber. You can wrap around several times if needed.

You can use the really good additional Hammer for Matchstick Gun from andre.bar as well! https://makerworld.com/models/115826

Additional HAMMER => It's easier to install the rubber-band and it shots awesome!

Don`t shot on human or animals it could hurt!

Happy printing!😃👍

Commercial license you can get here:

https://www.patreon.com/BamBamDesign/membership

Comment & Rating (81)

@Robbicon

Print Profile

[Multicolor] 0.2mm layer, 2 walls, 15% infill

Nice tiny gadget, prints fast and works good. Printed in Sunlu PLA+ black and Bambu PLA matte red.

The designer has replied

@BamBamDesign

Thank you very much for your nice comment and the pictures! Hope you have fun with it😉👍

(Edited)

@Cassiope34

Hi Robbicon, how did you make this the carbon-like surface ? Many thx.

@Robbicon

Replying to @Cassiope34 :

It's from the peo buildplate, look for juupine at aliexpress, there are different patterns available

@Cassiope34

Bravo ! Brilliant and effective little toy! I am not able to edit stl files. Would it be possible for you to make some modifications? - a little more angle at the spring. (the last 2 matches fall easily!) - hollow out the top of the arm piece to accommodate the elastic. - cut the top end of the bodysuit to make room for the elastic (single or double). I machined my version with a heated file :) The hammer broked many times... I don't see any solution ! Thank you so much.

(Edited)

The designer has replied

@BamBamDesign

Thx you for the review and your suggestions. I have some other projects running, but when i have time i wanna completly redesign the gun and integrate your thoughts.😉👍

@Cassiope34

Replying to @BamBamDesign :

Many many thx BamBam :)

@Cassiope34

Replying to @BamBamDesign :

Many many thx BamBam :)

@crazymajax

Print Profile

[Multicolor] 0.2mm layer, 2 walls, 15% infill

printed it in a single plate with my ams. it's smaller than I thought. the pole holding the trigger broke right away

The designer has replied

@BamBamDesign

Yes, it's very tiny but that was my challenge. Tip it is recommended to wind tape around the rubber or use the hammer mod for good functionality. kind regards

(Edited)

@crazymajax

Cool little thing. printed it in silk pla but that filament must be too brittle because the pole acting as cantilever for the trigger broke super quickly. I'll have to try using pla+ or something more durable.

The designer has replied

@BamBamDesign

Yep Silk Filament is not the best choice. PLA+ and PETG works fine

@H555666

Good model and it works good in PLA ! Also you might need some thick rubber bands to avoid breaking if you want to play a lot

The designer has replied

@BamBamDesign

Thank you for the review! 👍🏼

@lincolnspaxton

Print Profile

[Multicolor] 0.2mm layer, 2 walls, 15% infill

Works great did have some adhesion issues but I know it's most likely my fault otherwise great design 👍 👌 l have made four so far and will make more!

@spaxton1

Boosted

Print Profile

[One Color] 0.2mm layer, 2 walls, 15% infill

this thing is absolutely awesome and it satisfies my Pyro wants just make sure you print the hammer mod too or else it will be alot worse and harder to cock just dip the matches in hand sanitizer and then use a lighter to light and fire away!

@kallan

Print Profile

[Multicolor] 0.2mm layer, 2 walls, 15% infill

printed well shoots quite nicley

(Edited)

The designer has replied

@BamBamDesign

Thank you for comment.👍🏼 I know it's not plug and play, some give me bad ratings because they not get it to work😑 Feel free to checkout my other projects as well.😉

@kallan

defiantly will

@rrknaflic

definitely*

@andre.bar

Amazing toy and brilliant mechanics! The only issue I experienced was the tape on a rubber thing. Tried multiple tapes but none of them worked well or last long. 😅 So I ended up making a printed part for a hammer. https://makerworld.com/models/115826 🤓

(Edited)

The designer has replied

@BamBamDesign

Yes you are right, thats the weak part! Very cool you designed something for that. I will review and honor that next week. Iam on short vacation. Thank you

(Edited)

@BamBamDesign

On the other side you can try it with small shrink tubing. For me that works very good. In the video i used a little cutted stripe from Thera Band Gold(amazing powerful rubber) and a shrink tubing for diameter around 3. Greetings

@andre.bar

Replying to @BamBamDesign :

Yes, I know. Was also one of ideas I tried yesterday. Turned to be litle tricky so I slightly burned the rubber band :)) Another disadvantage of shrinktube is its awailability in a regular household. 🤷‍♂️

@colebmx

works good added a strip of the striking pad to the part the matchstick rides on now can light gas covered fires in style

The designer has replied

@BamBamDesign

Haha, i tryied the same with an little fire addon, but for now i get it not properly working😨! Could you share, please👍

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.