Articulated Minecraft Creeper: Print-In-Place by Delphant

Delphant

Toys & Games>Characters

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, 15% infill

1 h

2 plates

4.7(74)

0.16mm layer, 2 walls, 25% infill

7.5 h

1 plate

4.6(5)

Print By Object

1.1 h

1 plate

Boost

144

297

785

882

Released

Description

Articulated Minecraft Creeper: Print-In-Place

From the best-selling video game Minecraft!
Print-In-Place and fully articulated.
Optional face pieces included.
Designed in Fusion 360.
UPDATE 3/28/2024:
- Fixed model orientation.
- Made Head stronger.
- Default Head rotation +90 deg for single extruder filament swap for new extruded face option (FACE_EXT ver).
- Modified how built-in supports work, this should allow for easier removal (NO_SUP ver).
- Added a version that needs support for a better overhang on the upper legs (SUP ver).

Printing:

NOTE: This model was designed with a .4mm nozzle in mind, other sized nozzles may not work. Scale at your own risk.
Printed at .2mm layer height with 20% gyroid infill and 3 walls.
Use the default orientation.
FOR Creeper_NO_SUP and Creeper_NO_SUP_FACE_EXT
- Supports are not required, this version will have worse overhangs.
- DO NOT repair the model; doing so will remove the custom supports, causing the legs to print fully in mid-air.
- Turn off Detect Overhang Walls.

FOR Creeper_SUP and Creeper_SUP_FACE_EXT
- Print using supports.
  - Only needed under floating legs, paint-fill overhang.
  - Tree and Snug work well.

Clean Up:

After printing, the head and legs should snap apart, allowing them to rotate freely.
- Be careful not to apply too much pressure when releasing the joints.
You can also print the optional Creeper face and use super glue to adhere the pieces (for Creeper_NO_SUP and Creeper_SUP).

Design Iterations

Comment & Rating (93)

@Jelle9999

I had to print them once my son (4 years of age) saw them on makers lab. Printed quick and easy but i did not seperate the leggs yet :) . Thank you for the design was really nice.

@user_2503664597

Print Profile

0.12mm layer, 2 walls, 15% infill

I painted the model in the Bambu Slicer to resemble a funko pop charged creeper. Free handing all of that was a fun, but very tedious task. I think I would look into 3D modeling or a different slicer with better painting capabilities before doing that again lol. Bambu Lab PLA Basic Blue Overture Silk PLA Blue-Silver

The designer has replied

@ppastur

nice!

@tdub55

Print Profile

0.12mm layer, 2 walls, 15% infill

cool print! legs were very difficult to separate, but I still really liked it.

@Nerdy_Girl

Print Profile

0.12mm layer, 2 walls, 15% infill

son loves it! little bit of glue on the face that was my fault but it came out so smooth!

@darbooka

Print Profile

0.12mm layer, 2 walls, 15% infill

Printed great! Was a little tough to separate the legs, but overall great print!

@Ghostking17

Thanks bro! My nephews will love these

@yashrg

Two of the legs were kinda hard to separate. But very nice model once everything was articulating.

@RELYT2077

Print Profile

0.12mm layer, 2 walls, 15% infill

fun print.

@eier1188

Print Profile

0.12mm layer, 2 walls, 15% infill

the head will fall off if I twist it lol

@Sokraton

Print Profile

0.12mm layer, 2 walls, 15% infill

Good print result. Only, the head connection part was too weak, that I didn't go further moving and let it this way. I coloured the fingernails with a pen. Would be great to have them separately printable as it's designed with the facial parts.