Deburring Toolbox. Fits 150mm AFA Tooling Deburring Tool.
Remixed by
Copyright Claim
Deburring Toolbox. Fits 150mm AFA Tooling Deburring Tool.
Remixed by
Boost
22
32
24
Print Profile(3)
Without Brim 0.20mm layer, 2 walls, 15% infill
Designer
3.2 h
3 plates
With Brim 0.2mm layer, 2 walls, 15% infill
Designer
3.3 h
3 plates
0.2mm layer, 3 walls, 45% infill, no supports, no brim
3.2 h
2 plates
Boost
22
32
24
0
74
186
Released
Description
Deburring Toolbox for AFA Tooling 150mm with slots for the spare blades.
You will need six 20 mm long M3 screws to assemble the box. The optional magnet used for holding the tool in place is 6mm x 3mm.
Edit: I added an extra plate to the profile for those that dont have the 6 x 20mm M3 screws. I used these on my box without issues. (see pics) Please print the 6 pins as orientated flat on the plate for strength. They will be a tight fit and may need a light sanding to get them to snug in.
Remix for Bambu Lab printers. Original model by https://www.printables.com/@Lndnny_395651
Comment & Rating (24)
All
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
Just what I was looking for. Thanks
1
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
Came out great. the plastic screw alterntives dident work to great, but i made it work
The designer has replied
0
Reply
Nice job. Appreciate the pics and comments.
The plastic hinge pins etc were only something I added so people could make the box if they had no screws/bolts. They do require a little sanding/finessing to get them to fit but do the job as intended. Mine is still functioning just fine with the plastic pins since I uploaded the model. 👍
0
Reply
Realy impressive design!
Love it, thanks :)
(Edited)
0
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
I increased wall loops and top/bottom layers to 3 and increased infill to 45% since I was printing with PLA instead PLA+ or ABS. Case is rock solid
0
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
well worth the print awesome design
!
1
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
AFA tool fits perfectly. Nice
0
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
Perfect fit for the job at hand.
0
Reply
Print Profile
0.2mm layer, 3 walls, 45% infill, no supports, no brim
The front profile was perfect and came out spotless. it just didn't fit my particular deburring tool
0
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
passt alles wirklich top zusammen
0
Reply
Print Profile
Without Brim 0.20mm layer, 2 walls, 15% infill
Die Stifte sind sehr schwer zum einbauen
(Edited)0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld