This is a magnetic under-desk mount for a Canik Mete firearm. I tested it with an MC9, but it should work with other stock Mete firearms as well, such as the SF/SFT/SFX. The magnet slot is “open”, allowing you to put in more magnets if you wish, for a stronger “hold” or if you have an extended magazine which would add some additional weight. Requires 40x10x5mm magnets. You can attack the mount to your desk using your choice of standard #6 pan-head screws.

There are multiple models, depending on your optic/sight options:

• Iron Sights
• Optic: 26mm x 25mm
• Optic: 26mm x 30mm
• Optic: 28mm x 30mm
• Optic: 32mm x 30mm

I use the 26x25 model, to fit my Mecanik M01. The other sizes should fit the Mecanik M02, Holosun EPS Carry, 407 and 507 models as well. If you use one of the optic models, then you can actually rack your firearm easily as you pull it out of the mount by pushing forward into the optic. There is also a cutout for the loaded chamber indicator, so you can mount the firearm while it is already chambered.

Supports are not required to print this model, but I included supports with my profile because I have ironing enabled, and supports would be required in some areas to guarantee a clean surface.

More models for my firearms can be found here:

https://makerworld.com/en/u/2811301167/collections/147329

If you appreciate my models, please consider buying me a coffee!