AMS Lite Spool Adapter
Copyright Claim
AMS Lite Spool Adapter
Boost
5
11
4
Print Profile(1)
0.2mm layer, 3 walls, 10% infill
Designer
10.1 h
1 plate
Boost
5
11
4
0
32
31
Released
Description
Needed a simple adapter to let me use filament spools with larger holes on my AMS Lite. Slides right onto the existing spool holder so you can load your oversized spools. Has a chamfered edge to slide into Amolen spools as they have a small lip on the inside.
Comment & Rating (4)
All
Print Profile
0.2mm layer, 3 walls, 10% infill
Four stars because the file printed nicely, but it was far from fitting my stronghero3d spool. I used this one because it was specifically tagged for the brand I was using. I ended up using a threaded adapter I printed a while back for a Geeetech spool. The print profile came with 4 and had slow wall speeds. I ended up printing only 1 with 200mm wall speed and it worked just fine.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld