Generated with HueForge, and printed in real size with Bambu PLA Basic on a BambuLab P1S (with stock 0.4mm nozzle).

I recently started experimenting with HueForge. I thought I might as well use it to commemorate the Year of the Dragon with a print of the cover art to one of my favorite games of all time! I can't believe it's been 2 whole zodiac cycles since this game was released. This is my 3rd ever HueForge print, and could definitely be improved with better calibration, print settings, and a smaller nozzle (the print is quite small, as I wanted it to be lifesize - so some of the tiny text didn't come thru). I may make an improved version later for 0.2mm nozzles, but I might not bother. Either way, I thought I'd share this in case any other nostalgic Spyro the Dragon fans wanted to make one for themselves!

HueForge Info:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Purple Transmission Distance: 3
PLA BambuLab Basic Magenta Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 10

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #12 (1.04mm) swap to Magenta
At layer #13 (1.12mm) swap to Jade White for the rest.