The idea for this cover arose from the following problem. My wife used the breast pump on the go and transported it in a bag. It often happened that the buttons of the pump were accidentally triggered, causing the pump to operate and thus lose battery power. This resulted in situations where the breast pump's battery was empty when it was supposed to be used.

The cover fits perfectly and provides a space between itself and the buttons of the pump. It is even possible to charge the pump's battery while using the cover.

The cover is designed for the Bebebao brand breast pump, which was purchased on Amazon (Germany). However, I suspect that it may also be sold under different names in other countries.

Visit this link for the Onshape document:

https://cad.onshape.com/documents/a9563154077a2bec0cd29140/v/cf9b99098edae1738a692cf7/e/95c276b16640eee9c8e19fa7?renderMode=0&uiState=651b1efed17d6c51a2f77914

Print settings:

• Layer height: 0.2mm
• Walls: 4
• Top/Bottom Walls: 4
• Infill: 20%

Please share your makes and experiences.

This text was partially translated from German to English by OpenAI (ChatGPT).