Okay check out my Blank LED Light box sign Template crafted for this contest.

ZERO glue/screws required, everything just snaps together!

I added a brand new stand to set it into if you're not using the built-in wall hook that can use either 2032 battery powered LED lights like this, or one of the 3xAA battery box lights from Michaels or a USB powered cable via the hole//channel on the bottom to plug it in. Also standardized the white sign insert so it can be printed on the A1mini and updated the inner ring to match as well!

The sign insert is 100% generatable through MakerLab.

If you USE Make My Sign to create the insert:

• choose circle shape, change the size to 180x180mm
• set Border to NONE or 0mm offset
• set thickness of Base to 0.6mm to fit the inside lip of inner ring
• add your text or SVG's and you're good to go!

NOTE: make sure to keep your design 2mm away from the edge to allow for it to lock underneath the inner ring.

Let me know what you all think!!

UPDATED 12/23/24: added a deeper lightbox profile with a flat inner cavity, noticed that some LED were showing through due to being to close to the sign inset. Also included a new stand to fit the deeper box!