Bambu Lab logo 3D emboss letters by 3Dacores

3Dacores

Art>Signs & Logos

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 6 walls, 25% infill

3.4 h

1 plate

4.8(13)

Boost

162

Released

Description

Bambu Lab where innovation meets craftsmanship in the world of 3D printing!

Your 3D printing room adorned with this 3D logo is where your ideas come to life.

The Bambu Lab symbolizes the vibrant energy that fuels the passion of this company for pushing the boundaries of 3D printing technology.

Join their journey of innovation, where technology meets artistry, and see your visions materialize with unparalleled precision under the gentle radiance of the Bambu Lab.

Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship.
All trademarks, logos and characters are the property of their respective owners.
Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders.
I respect the intellectual property of all brands and/or characters mentioned or used in this design.
If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.

Comment & Rating (14)

@BrianMDK

Print Profile

0.2mm layer, 6 walls, 25% infill

@3dacores

Thank you for printing the design! It' looks great! Happy printing without errors and spaghetti :)

@hookuum

Print Profile

0.2mm layer, 6 walls, 25% infill

very clean print thank you

@Initial_E

Print Profile

0.2mm layer, 6 walls, 25% infill

Easy file to print. Good logo.

@DavidTheBeast

Print Profile

0.2mm layer, 6 walls, 25% infill

@Ryanmallaburn

Print Profile

0.2mm layer, 6 walls, 25% infill

@renatotb1

Print Profile

0.2mm layer, 6 walls, 25% infill

@frank.schuldrei

Print Profile

0.2mm layer, 6 walls, 25% infill

@jlmcocker

Print Profile

0.2mm layer, 6 walls, 25% infill

@Ben_Douver

Print Profile

0.2mm layer, 6 walls, 25% infill

@user_2146033520

Print Profile

0.2mm layer, 6 walls, 25% infill

Strength Issue:There were to many walls included, less wall layers would have worked to and reduced the print time. Bit in general I love this model! <3

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.