Fotobox klein / Photobox small by raphineu

raphineu

Hobby & DIY>Other Hobby & DIY

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 1 walls, 0% infill

Designer

1.1 h

1 plate

4.2(5)

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

1 plate

4.7(3)

0.2mm layer, 3 walls, 15% infill

Designer

16 min

1 plate

4.7(3)

0.2mm layer, 3 walls, 15% infill

Designer

2.6 h

1 plate

4.0(1)

Click to see more

Boost

Released

Description

Kleine Fotobox zum Fotografieren kleiner Modelle.

Größenmäßig druckbar auf dem A1 Mini. (130x150)

- 1x Ständer ohne Boden (auch verwendbar als “Deckel” > siehe Bild)

- 1x Boden zum Einsetzen

- 1x 3-seitige Wand (Profil für Vasenmodus und Profil für normalen Modus)

>> Auf dem Bild wurde im Vasenmodus gedruckt. Hier bleiben die Wände nicht ganz gerade.

(gefiel mir aber ganz gut)

___________________________________

Small photobox to shoot small models.

This model is printable also on A1 Mini. (130x150)

- 1x stand without bottom (can be used as a top cover also > see picture)

- 1x flat bottom to insert the wall

- 1x 3-sided wall (print profile in vase mode and print profile for normal mode)

>> on the pictures it was printed in vase mode. The walls may not stay completely straight, but I liked that.

Comment & Rating (20)

@azketta

Boosted

Print Profile

0.2mm layer, 1 walls, 0% infill

I absolutely love this photography box. I printed it in vase mode at 100% in a gradient blue/silver and it makes for the most gorgeous photos … I scaled it up though, because I needed a larger one for my dragon prints … and it was mostly good, except on the edges where it frayed… still works well, but eventually I’ll have to reprint it without vase mode. It would be incredible to have a larger vase mode model

(Edited)

The designer has replied

@raphineu

I could easily add a bigger one. which size do you want?

@azketta

Boosted

Replying to @raphineu :

I tried to make it close to max for the print bed. I would absolutely love anything close to that size, and greatly appreciate it. This is definitely an incredible design. I love how it prints and looks in photos.

@raphineu

Replying to @azketta :

Maximum size of which printer? A1 Mini? Unfortunately it will take some time, bc I'm on vacation at the moment. ;)

@Arash_68

Print Profile

0.2mm layer, 1 walls, 0% infill

Strength Issue:I don't try with another filament (I don't want loose another time and filament for try) No problem with my printer. 3 stars for the doubt of filament

The designer has replied

@raphineu

If it's not working in Vase Mode it's most likely caused by the Filament. I tried with two different Filaments without issues. Maybe you should choose the other variant (no vase mode). it's more stable

@Vodvarek_Vodvar

Print Profile

0.2mm layer, 3 walls, 15% infill

Thank you;) Nice print👍 https://makerworld.com/models/144758 https://makerworld.com/models/159281 https://makerworld.com/models/159351 https://makerworld.com/models/159482 https://makerworld.com/models/159398 https://makerworld.com/models/162615 https://makerworld.com/models/159287