This is a Remix of an design from Morganlowe on cults3D view various improvements and changes. Since I had no access to the original CAD files, I had to hack something together.

The .3mf file has many negative volumes to make everything work, so use a Slicer than supports there features (PrusaSlicer, Bambu Studio, …)

If you fancy a more advanced version with up to 4x 3.5" drives, check out my other case:

Network Storage - 4 Bay / 3.5" / ITX NAS

Changes:

• dual 3.5" drive support
• easier printing due to 45° overhangs
• removed branding / logo
• more air vents
• closed up USB holes
• fixed facette and mesh errors

Quick Specs (for more read below):

• supports ITX SoCs only (or something with a cooler not higher than 35mm)
• 3,5" drives natively, 2,5" with an adapter
• Pico PSU
• 60mm fan for cooling

Depending on your drives and used screws, you might encounter inteference with the SATA power cable. Just leave those unused, its plenty strong with 6 out of 8 too.

If you like it, consider a small DONATION :)

--------------------------------------------------

WORK IN PROGRESS, I HAVE NOT PRINTED IT YET