Hello there!

I designed these parts to help with the modification of a cheap pottery wheel from amazon into a sanding wheel for resin dice. Included are two files.

Dice Wheel Splash Shroud: This is for managing the splash from wet sanding dice as the rotation of the wheel will throw water filled with fine resin dust all over the room without it.

Dice Wheel Zona Paper Holder: This is for punching down Zona polishing paper onto the pottery wheel itself. it allows the paper to be tensioned without tape and removing the possibility of slippage.

-----------------------------------------------------------------------------------------------------------------------

Supplies

The Pottery wheel this was designed for is called VEVOR 30W Ceramic Wheel and uses the 10cm wheel. There are several on amazon that use the same case. all that matters is the case and the wheel size.

They look like this

Link : https://www.amazon.com/dp/B09KXZZP1X/ref=syn_sd_onsite_desktop_0?ie=UTF8&pd_rd_plhdr=t&aref=xxFtP1BWTF&th=1

Another clone : https://www.amazon.com/NantFun-Turntables-Detachable-Adjustable-Beginners/dp/B0B9NRBRNZ/ref=sr_1_6?crid=4LC1S01WI8IX&dib=eyJ2IjoiMSJ9.mBJYb26AA78DTHvGNdC1wNdmWO_qbb7jIP0le922DYBKG8ObMKdxLKXQ_yhkfyP1x38KL_FnDR1tN4lYH0TcTw.YkLr1eiL7J1l2wcxjRcr5zApcB3NVJmSaCUmyZykcfk&dib_tag=se&keywords=pottery%2Bwheel&qid=1704933441&sprefix=pottery%2Bwheel%2Caps%2C81&sr=8-6&th=1

Zona Paper : https://www.amazon.com/37-948-Polishing-2-Inch-11-Inch-Assortment/dp/B001BHGC7G/ref=sr_1_1?crid=12ZAAUH8K8EZ9&dib=eyJ2IjoiMSJ9.vV67QjVJL5O99ZJfGnK1ASztF723foINvweqhgkH9kKh3PoX2hd9xVUKbt5T8ARuTKvMkWf_2LsVW3eR2jTuKw.9N3ji6hgm4I-CK-olcOfFPAEJLp383F6gA-4TcFFy50&dib_tag=se&keywords=zona+paper&qid=1704934649&sprefix=zona+paper%2Caps%2C79&sr=8-1

-----------------------------------------------------------------------------------------------------------------------

Print Settings

• Both file print without supports.
• I print the Shroud at:
  • 15% gyroid infill
  • 4 walls
  • 0.28mm layer height
• I print the paper holder at:
  • 15% gyroid infill
  • 4 walls
  • 0.28mm layer height

!!!As always please wear a respirator and eye protection while sanding resin dice!!!