Monster Truck Toy Remixed by awillkom

Remixed by

awillkom

Toys & Games>Other Toys & Games

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

3 h

1 plate

4.6(10)

0.2mm layer, 3 walls, 10% infill

Designer

2.9 h

1 plate

4.7(3)

A1 mini, single color, 0.2mm layer, 3 walls, 15% infill

3.4 h

1 plate

Boost

114

217

Released

Description

I found this really awesome fully printed monster truck toy on Printables. It has an integrated suspension sort of thing that works surprisingly well, and I can speak from experience that it's the most robust toddler toy I've ever made. They have survived a lot of abuse and kept on rolling.

Comment & Rating (20)

@chrisperry.wv

Print Profile

0.2mm layer, 3 walls, 10% infill

I had a hard time getting the body to print. It took several tries. Maybe it was my PETG or a dirty bed? I ended up needing a brim... or skirt... whichever one connects to the model.

GIF

The designer has replied

@awillkom

Print looks good though, thanks for the rating. I did print the original with PLA and didn't have any issues, so maybe it was the bed not being clean. I'll keep an eye out and if others have issues too, I'll add a brim to that part of it. you are talking about the part with the cab and bucket, right? not the chassis?

@chrisperry.wv

yes. the cab. could have been my bed for sure… I had to give the axles a couple of goes as well so maybe your right. my kids love it though. I did just clean my bed today so I’ll have to print another to see if it does any better.

(Edited)

@rui.wang

Boosted

I scaled everything by 200% (well, the suspension and wheel covers by 198% since they are otherwise too tight) and printed them out on my P1P. It looks awesome. My kid loves it. Thanks for making the model!

@cfactor

Print Profile

0.2mm layer, 3 walls, 10% infill

Nice print, however it seemed impossible to fit the chassis into the body. I had to get creative with sandpaper and an xacto knife.

@Dani

Print Profile

0.2mm layer, 3 walls, 10% infill

Great build and it works great! Also great that you can print per object so that you can have different colors without wasting more filament than needed. My only issue was getting the base connected to the chassis. It's a very tight fit and it took me a long time to get it in, but once it did I don't think it's ever getting loose :)

@andreasp

Print Profile

0.2mm layer, 3 walls, 10% infill

@Fabix

Very very nice little monster truck! I printed this out just with the bambu app. First try rocks! Only thing: The wheel caps are not fitting in.

The designer has replied

@awillkom

they did take a lot of force when I put them on as well. I may go edit the profile to reduce the size of those slightly and make it easier. thanks for letting me know 🙂