Humidity Sensor CLOSED (Handy AMS Silica Box)
Remixed by
Copyright Claim
Humidity Sensor CLOSED (Handy AMS Silica Box)
Remixed by
Boost
25
39
21
Print Profile(3)
![[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USa6c97c49abde42/45174255/instance/2024-01-23_c870d0bdbdeec.jpg?image_process=resize,w_100/format,webp)
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
full set - easier print bottom - 0.24mm layer, 2 walls, 15% infill
4.3 h
1 plate
Full set w/ hygrometer
5.2 h
1 plate
Boost
25
39
21
1
116
66
Released
Description
Handy AMS Silica Box - Humidity Sensor CLOSED Remix
In this Version the humidity Sensor has a separated CLOSED compartment.
The sensor therefore has no direct connection to the desiccant.
Compatible with Ø44x15 humidity Sensor (~42mm Bore) like this…. https://amzn.to/3S6XJmU (Reflink)
Links:
Original Box: https://makerworld.com/models/103480
Open Design: https://makerworld.com/models/147463
Closed Design: here
Side Box: coming: https://makerworld.com/models/154298
Happy Printing😃 Don't forget to leave a like👍
Comment & Rating (21)
All
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
Thx for the model.
Printed in ABS
The designer has replied
1
Reply
Your welcome 🤗 Thx for your review👍🏼
0
Reply
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
For me it is much more comfortable and less bulky than other models I have tried, as it leaves the right space for the coils and is very simple.
I printed it in ABS.
Thank you
Per me è molto più comodo e meno ingombrante rispetto ad altri modelli che ho provato, in quanto lascia lo spazio giusto alle bobine ed è molto semplice.
Io l'ho stampato in ABS
Grazie
The designer has replied
0
Reply
Thank you for the perfect Rating and the nice description.🤩 You can also checkout my other models😉
0
Reply
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
small bridging issue on top of the circle but still works as it should.
The designer has replied
0
Reply
Hi thx for comment. I did a quick design change to get the top from cutout a bit better. My Goal is evertime to print without support!Hope you like....
Will be nice to try again and give the 5-Star 🤩🤩🤩🤩🤩 Greetings
0
Reply
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thank you👍🏼
(Edited)1
Reply
Print Profile
full set - easier print bottom - 0.24mm layer, 2 walls, 15% infill
Fit great, easy to remove. In ASA so I just toss them in the dryer once a week.
0
Reply
Print Profile
full set - easier print bottom - 0.24mm layer, 2 walls, 15% infill
optimal 👍👍👍
0
Reply
Print Profile
Full set w/ hygrometer
cool thanks
0
Reply
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
Looks amazing!
1
Reply
Print Profile
[ASA/ABS] PLA works,too 0.24mm layer, 2 walls, 15% infill
Great Job 👍
1
Reply
This is a great design!
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld