Shopping Cart Coin Key Chain (Canada)
Shopping Cart Coin Key Chain (Canada)
Boost
35
43
19
Print Profile(5)
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
Designer
14 min
1 plate
17 Items, 25% ironing flow, 50mm/s
Designer
2.3 h
1 plate
17 Items 30% ironing flow, 50mm/s
Designer
2.5 h
1 plate
17 Items, 20% ironing flow, 50mm/s
Designer
2.3 h
1 plate
Click to see more
Boost
35
43
19
3
150
115
Released
Description
These are simple shopping cart key chains. They are the size of a canadian loonie I can do other sizes if you message me the coin type. I did a Height Range Modifier to iron the main flat surface in the “Objects” tab of your slicer. Ensure ironing is set to “all solid layers” for the range for best results. My best results are generally from 20-30% flow at 50mm/s. I will usually print one tag at 20%, 25% and 30% to figure out the best value then fill the plate with the best settings.
Comment & Rating (19)
All
Boosted
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
Great print, used ironing at 30% and 0.12 spacing. Only thing left is to try it on grocery day (Monday)!
1
Reply
Boosted
By the way: it works great!
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
printed really well, works on the carts at Walmart. only problem is they must remain in place while you shop.
The designer has replied
1
Reply
give it a little tug. it usually comes out. personally I print a bunch and leave them behind. like a pay it forward
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
Simple but effective print. I find sanding the edges of the "coin" make it a bit smoother to insert.
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
had some surface issues with this print, but plenty useable. might be might printer, so I'll still give this a 4!
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
Work like a charm!
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
ne rentre pas dans nos caddie trop gros dommage peut être pas pour la France
(Edited)Other Issues
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
1
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
1
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill, ironing 25% flow, 50mm/s
1
Reply
Print Profile
17 Items 30% ironing flow, 50mm/s
1
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld