Model
Do NOT adjust the size in your slicer!! The layers will not come out right.
Dimensions: 180x180
Do not change the size, this will cause errors in color change compromising the entire print.
Use my print profile or you will not get the desired results.
The print is a 180x180, it can be printed safely without AMS and on any printer.
I hope you like it, if you want to support me put like and let me know what you think!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Yellow for the rest.